group-brushes

Our phosphor bronze brushes – Click to enlarge.

Our range of Phosphor-Bronze brushes for stone cleaning / metal burnishing, is made exclusively for us to our specifications and is of superb quality. The brushes are made from crimped phosphor-bronze (non-rust) wire bristles, set into wooden stocks with 100% density for effective non-scarring action

The brushes have been used with excellent ratings in the cleaning of historic buildings in the UK especially where Vulpex soap has been specified for interior stonework.

The brushes feature fine-drawn phosphor-bronze wire crimped for extra strength and densely packed on hard wood stocks. In action, all the wire elements move as a single unit, promoting safer, scar-free cleaning on the most vulnerable stone facings. Compare this with the average industrial wire brush in which tufts of coarse wire rotate freely in pockets of space, leaving unsightly scratches.

Metal workers and restorers have also found the improved brushes to be effective for faster removal of corrosion products and burnishing with minimal scratching. Picreator’s Pre-lim cleaning/burnishing paste, as a final process, produces a silk-smooth finish.

There are five brushes in the range:

small-scrubSmall Scrub Brush

Dimensions:

133mm x 50mm
(Approximately 5.24in x 1.97in)

Large Scrub Brush

Dimensions:

175mm x 55mm
(Approximately 6.89in x 2.17in)

Toothbrush

Dimensions

178mm x 16mm

(Approximately 7in x 0.63in)

Sculptor’S Brush

Dimensions

330mm long
(Approximately 13in long)

Stairbrush

Dimensions

178mm x 16mm x 73mm

(Approximately 7in x 0.63in x 2.87in)

The working wire has a length of 25mm and, in the sculptor’s brush, 34mm. In regular use the brushes have proved to be resilient with an excellent service life.

For total costs including VAT/carriage (UK) or details of our distributing Agents in other countries contact our office on:
Tel:+44 (0) 20 8202 8972 Fax: +44 (0) 8202 3435 or send us an e-mail via our contact page.